KIT composed of 3 aluminum bars complete with high brightness 12W LED strips (total 36W) with 36W 12V power supply, ideal as a light for under kitchen cabinets, for shelves, inside furniture, walk-in closets. The bar is equipped with built-in tabs, but can also be installed externally by fixing it using the 2 metal supports supplied.

It is powered by the supplied power supply and thanks to the latest generation integrated LEDs it allows significant energy savings. The strip and the aluminum profile can be cut at any point, this is possible thanks to the particular linear contact. It also comes complete with an opaque cover that hides the LEDs and emits a more homogeneous brightness without dazzling the eye. The strip has a 3000K, 4000K, 6500K light temperature with a light intensity of 560 lumens (840 total lumens). And the strip can also be dimmed using a sensor or a special external dimmer.

The bar connects to the power supply via a proprietary jack cable, the power supply is equipped with 6 power outputs, to connect the bars, it has a slim and compact design to be easily hidden in junction boxes and has a power of 36W. It is powered by 230V via the supplied cable and plug and is equipped with protection against short circuits and voltage surges. It is also equipped with inputs for connecting sensors.

Easy to install, it does not require any particular technical skills thanks also to the PLUG and PLAY connector. The connector connects quickly and easily to the profile. The bar measures 2 meters long x 12mm wide x 10mm high. The power supply has compact dimensions: 145mm x 55mm x 20mm. The kit includes 3 LED bars, 1 36W power supply, 3 connectors for connection.

Furthermore, this 3-bar KIT can be purchased with or without a sensor to control the switching on and off of the bar:

4 TYPES OF SENSORS AVAILABLE:

1) Infrared sensor with motion detection:
Passing infrared sensor, detects movement at a distance of 1-7cm and allows automatic switching on of lights and LED strips. Suitable for installation in places where, for reasons of hygiene, touching a switch to turn on the light is not permitted. The sensor is activated when motion is detected. Made of silver colored plastic, it adapts perfectly to all furnishings.

Possibility of inserting it into furniture, in the biological field to turn on lights in sterilized environments without touching. The sensor has an IP20 protection rating suitable for indoor use. It also comes complete with support for wall mounting. The control unit is equipped with a cable with a length of approximately 2.20 meters to position the sensor where it is most convenient. Maximum power supported 60W.

The sensor is powered by 12Vdc / 24Vdc with the 3-pin connector (using the 36W power supply included in the package).

2) TOUCH touch sensor with the possibility of dimming the light intensity:
TOUCH touch switch sensor which allows the switching on of lights and LED strips. Suitable in all places where there is no possibility of installing a classic switch. The sensor is activated at the touch of a finger and also allows you to dim the light intensity by holding down the button. Made of silver colored plastic, it adapts perfectly to all furnishings.

Thanks to this sensor we can easily turn an LED strip on and off, or dim the light intensity.

Aesthetically beautiful, it can be easily installed recessed into furniture, shelves and shelves and is equipped with a blue LED which indicates correct functioning. The switch has an IP20 protection rating suitable for indoor use. The control unit is equipped with a cable with a length of approximately 2.20 meters to position the sensor where it is most convenient. Maximum power supported 60W.

The sensor is powered by 12Vdc / 24Vdc with the 3-pin connector (using the 36W power supply included in the package).

3) Proximity sensor for single door that turns the light on and off even with the passage of the hand:
Automatic switch sensor that detects hand movement at a distance of 1-7cm and allows automatic switching on of lights and LED strips. Suitable for installation even in places where, for reasons of hygiene, it is not permitted to touch a switch to turn on the light. It can also be installed in single-door furniture for automatic switching on when opened. The sensor is also activated when you pass your hand: 1 pass turns the light on, 2 passes turns it off. Made of silver colored plastic, it adapts perfectly to all furnishings.

Possibility of inserting it into furniture, in the biological field to turn on lights in sterilized environments without touching. The sensor has an IP20 protection rating suitable for indoor use. It is also provided