Inventory: 122
Condition: New
In Stock Technical Specifications:
Dimensions: 56.5mm x 35.8mm x 22.3 mm
Color: White
Input voltage: 220-240V AC/50-60Hz
Degree of protection: IP20
Technical Design:
Description:
The CBU-ASD is a wireless control unit for LED drivers and halogen with interface for dimming 0-10V, 1-10V or DALI. The control output can be configured as a control interface is analog with driver by 0-10V (and 1-10V) or digital with DALI Standalone.
Is able to control up to 3 drivers DALI.
When the output is configured as " DALI Standalone, the CBU-ASD acts both as a controller and as a source of power supply, allowing direct connection to an LED driver with DALI interface without the aid of an external DALI power supply. The so-called DALI Standalone) - you can implement lighting systems, multi-channel color (RGB) or color temperature adjustable, while keeping to a minimum the wiring and the number of components.
The CBU-ASD does not conform to the standard IEC 60929 and therefore is not designed to be connected to a DALI network existing. The module can be used only in a closed system, i.e. as part of a lighting system that is not connected to a DALI network external.
Technical features:
- Does not require external gateway
- Automatically create a wireless mesh network fast
- Size very small for the devices installation of lighting
- Analog output/digital configurable
- Analog output: 0-10V sink/source
- Digital output: DALI Standalone
- Easy management of RGB and color temperature
- The output of the switched network controllable
- Single control 2 -, 3-and 4-channel
- Dimming from a wall switch-standard on/off
- The device firmware can be updated over the air
- The cloud service of Casambi improves the user experience
- Input voltage: 220 - 240 Vac
- Power consumption: 1.1 W PF 0,6
- Output current max 0.6 A ac
- Num max driver DALI 2
- Num max driver 1-10V 2
The CBU-ASD measure 56,5 x 35,8 x 22,3 mm, IP20 and operates at an ambient temperature between -20 and +40 °C (if the output current is 0.6 A), and between -20 and +50 °C (if the output current is 0 A). It is important that the ambient temperature does not exceed the specified maximum value. For the installation can be used an electric cable, rigid or flexible 0.75 - 1.5 mm2.
Casambi is an advanced system for the control of lighting based on Bluetooth Low Energy (BLE). BLE is a wireless technology, avant-garde, the unique low energy consumption, integrated into all modern smartphones, tablets and smart watch, and the only one in the world ready for the challenges of the future.
Intelligent
The devices Casambi are equipped with their own intelligence. The intelligence is replicated in each node so that at any point of the path there are possibilities that errors will occur. The system itself is in constant synchronization based on consensus. 1.2 Connected devices Casambi connect when necessary. It is not Internet connection required for the general operation and functionality of the ordinary. The Bluetooth Low Energy technology is already implemented in smartphones and tablets, so you can establish connections without additional gateways. The speed of the connection between a smart device and the devices Casambi is quick and without breaks, just open the App to start the connection to the system.
Intuitive
This system is intuitive: at the first connection nodes are associated automatically, and can be used and customized by anyone, without the need to involve experts for the commissioning.
Wireless
The network Casambi is based on the protocol of Bluetooth Low Energy, the best wireless technology for energy-efficient and ready for the challenges of the future. 2. Bluetooth Low Energy
The Bluetooth Low Energy, also known as Bluetooth 4.0+, Bluetooth Smart, or just BLE, was originally designed by Nokia as Wibree and then be adopted by the Bluetooth Special Interest Group (SIG) and is released in 2010. The low-power consumption features of the BLE allows developers to build products powered by small button batteries or devices for energy storage, making the BLE the best protocol to use in applications to control wireless lighting.
Productsof the same type
Products Recommended
